Living Legends GM Screen


Assembly Instructions


Hi, and thank you for purchasing the Living Legends GM Screen! These 
instructions will guide you through the process of printing and 
assembling your GM Screen.


PRINTING

1) Open file UNI10002.pdf with yout Acrobat Reader. These 
instructions assume that you are using Acrobat Reader 6.0; some 
details may vary slightly between different versions of Acrobat.

2) The Living Legends GM Screen can be printed in color or black & 
white. Obviously, a color printer is required if you want to print 
your GM Screen in color. Decide which option best fits your 
situation.

3) Load 3 sheets of heavy cardstock paper into your printer. White 
cardstock is best if you intend to print your GM Screen in color, 
but for black & white printing you may use any light colored 
cardstock.

4) Click the "Print" button in Acrobat.

5) Select the printer you want to use, and adjust its Property 
settings if needed. Do not put a check mark in the "Print to File"
box.

6) Print Range:

     Print pages 1 thru 3.
     Subset: All pages in range

7) Page Handling:

     Copies: 1
     Page Scaling: None
     Auto-Rotate and Center: check this box
     Choose Paper Source by PDF page size: un-check this box

8) Click the "Okay" button to print pages 1-3.

Your printer should print pages 1-3 of the .pdf file, oriented and 
scaled properly to fit the paper with about a 1/2" margin on all 
sidea. If the pages don't print properly, review the preceeding 
instructions to figure out what went wrong. If they do print 
properly, proceed with step 8.

9) Remove the three printed pages from the output tray. Do not 
rotate or shuffle them. Turn the entire stack over, lengthwise, 
and e-insert them into the paper imput tray.

10) Print Range:

     Print pages 4 thru 6.
     Do not change any other printer settings.

11) Click the "Okay" button to print pages 4-6.

You should now have three pages, printed on both sides. The 
printing on the back should NOT be upside-down from the printing 
on the front. Again, if anything went wrong, review these 
instructions and try to locate the error.

If you canot get the pages to print correctly, email unigames@io.com 
and request assistance.

ASSEMBLY

12) Remove the pages from your printer's output tray. Do not 
rotate or shuffle them. Place the entire stack in front of you, 
oriented so that you can read the text on the top page.

13) Take the top page and slide it to the right of the stack. 
Take the bottom page, and slide it to the left of the stack. You 
now have the three pages of the GM Screen, laid out the way they 
should be.

14) Tape the edges of the three pages together. We recommend one 
strip of tape on each side of both seams. Trim off any excess 
tape with a scissors.

15) The picture with the words "LIVING LEGENDS" on it goes in the 
middle of the GM Screen, facing the players. The pages to each 
side of it should be identical; they display information that is 
useful to the players.

If that's not how your GM Screen turned out, then something went 
wrong. Review the instructions to try and locate the error. Again, 
email unigames@io.com and request assistance if you can't figure 
it out.

Fold the side pages back away from the picture - that is, toward 
the GM's side of the Screen.

Viola! Your Living Legends GM Screen is ready for action!